Armor AG Brown Seal 25 - Premium Brown Tinted Exposed Aggregate Sealer for Concrete Protection | Ideal for Driveways, Patios & Pool Decks

Product Description

Brown-Tinted High Gloss Wet Look Sealer For New and Existing Concrete, and Concrete Pavers The Armor AG Brown Seal is a solvent based semi-transparent brown-tinted acrylic sealer that is designed to seal, enhance, and protect a variety of exterior concrete and concrete paver surfaces. It penetrates deep into the surface where it chemically bonds to the pores of the concrete and pavers, creating a long lasting, non-yellowing, breathable finish that enhances dull or faded surfaces. It is ASTM tested and approved as a cure and seal, and can be applied to new concrete. Uses & Choosing The Right VOC Uses: The Armor AG Brown Seal is designed for use on poured concrete, stamped concrete, aggregate concrete, and concrete paver surfaces. It can be applied to unsealed surfaces, and surfaces previously sealed with a solvent-based acrylic. It can be applied to new concrete to help with proper curing. Do not apply this product to red clay brick, slate, flagstone, or other types of natural stone. If you are looking to seal red clay brick, slate, flagstone, or any other type of natural stone, consider the Armor WL550 or the Armor SX5000 WB. Choosing The Right VOC For Your State: VOC regulations for paint/sealers/coatings vary by state. The Armor AG Brown Seal is 700 VOC. The 700 VOC formulation can be used in every state except AZ, CA, CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, NY, OH, PA, RI, UT, VA. Please note that the above information is for informational purposes only, and based solely on information known to Foundation Armor at the time this page’s publication. VOC regulations can change, and can vary by county within each state. Please consult your federal, state, and local regulations to ensure you are using a VOC compliant product. If you live in a restricted state, please consider the Armor LV25, Armor AR500, or Armor WB25 instead. BENEFITS Lasting Brown Gloss Finish When properly applied, the Armor AG Brown Seal can last for up to 1-3 years before the need for a recoat. Won't Peel, Flake, or Yellow The Armor AG Brown Seal is breathable, UV-resistant, and non-yellowing. It is self-priming and offers a superior bond to concrete and concrete pavers. Protects The Surface The durable high gloss surface film will reduce damage caused by surface abrasion, spills, water absorption, road salts, and weather. Can Be Applied To New Concrete The Armor AG Brown Seal meets ASTM C1315 and ASTM C309 standards, and can be applied to new concrete to help with the curing process. Brown-Tinted High Gloss Finish Appearance The Armor AG Brown Seal will enhance the surface with a semi-transparent brown high gloss finish. The actual level of gloss and enhancement received will depend on the type and age of the surface, age, porosity, condition, applicator, application method, and amount of material applied. For an accurate representation of what your surface will look like once sealed, we suggest applying the product to a test area first. How To Apply The Armor AG Brown Seal can be applied with a 3/8-1/2” nap roller, or a solvent resistant commercial pump sprayer. For a consistent wet look and high gloss finish, apply two coats spaced 24 hours apart. Time Of Day: The Armor AG Brown Seal should only be applied in the early evening when air and surface temperatures are declining, and when the sun is no longer positioned over the surface. To avoid bubbling and hazing, do not apply in the morning or middle of the day. Surface Preparation: The Armor AG Brown Seal should be applied to a completely clean and dry surface. If the surface was cleaned with water or pressure washed prior to application, allow the surface to dry for at least 24 hours before sealing. While pressure washing the surface is typically sufficient, spot treatment may be necessary for deep or older stains. The Armor AG Brown Seal is designed specifically for use on unsealed concrete and concrete paver surfaces, as well as concrete and concrete pavers previously sealed with a solvent based acrylic. If the concrete is smooth or trowel finished, and doesn’t quickly and easily absorb water, other surface preparation may be required to open up the surface pores, such as acid etching or grinding. The Armor AG Brown Seal should not be used to seal clay brick, red Chicago pavers, flagstone, slate, or natural stone. If you are looking to seal clay brick, red Chicago pavers, flagstone, slate, or natural stone, consider instead of the Armor WL550 or the Armor SX5000 WB. Note About Sealing Pavers: Please note, while the Armor AG Brown Seal can be applied over paver joints, it is not designed as a bonding agent and will not harden or bond the loose sand in the paver joints. If applying with a roller, loose sand in the joints may cling to the roller and be redistributed across the pavers. For best results, apply first coat with a sprayer if you are applying to pavers with loose sand in the paver joints. When applying to porous pavers, gloss level may be reduced, and more material may be required to achieve desired finish. Adding Non-Slip: For added surface traction, the Armor Non-Slip additive can be added. The ultra-fine, fine, and coarse Armor Non-Slip additives works best in the Armor AG Brown Seal . Applying the Ultra-Fine: Slowly drill mix 3-6.5 ounces of non-slip additive per gallon of sealer, until completely blended, then apply. For Fine and Coarse: When applying the second coat, add the non-slip additive to the coating using a broadcast spreader, and back roll to encapsulate the non-slip additive. Clean-Up: Use Xylene or acetone. Dispose of containers in accordance with local and federal regulations. Product Removal: Dried, cured sealer may be removed with a the Armor CR100, or by using a diamond grinding method, sandblasting method or similar mechanical action. Up to 175 FT2/Gallon In One Coat Coverage Porous Surfaces: Up to 175 FT2/gallon in one coat. Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat. Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The above coverage rates are estimates and will vary. Two coats are suggested for even coverage and appearance. Please note, if it is your first time sealing pavers, or an overly porous surface, a third coat may be required. More Great Foundation Armor Products To Consider Armor AG Brown Seal Add to Cart Armor AR350 Add to Cart Armor WB25 Add to Cart Armor AR500 Add to Cart Armor WL550 Add to Cart Armor Roller Kits Buying Options Armor HVLP Sprayer Add to Cart Customer Reviews 4.3 out of 5 stars 57 4.6 out of 5 stars 2,132 4.4 out of 5 stars 88 4.5 out of 5 stars 882 4.3 out of 5 stars 437 4.8 out of 5 stars 9 4.0 out of 5 stars 18 Price $224.99$224.99 $224.99$224.99 $199.99$199.99 $224.99$224.99 $249.99$249.99 — $169.99$169.99 Uses Concrete/Pavers Concrete/Pavers Concrete/Pavers Concrete/Pavers Concrete/Pavers/Brick/Stone For Sealers/Coatings/Paint For Sealers/Coatings/Cleaner Leaves Visible Surface Film ✔ ✔ ✔ ✔ ✘ ✘ ✘ Finish Brown-Tinted High Gloss Low Gloss High Gloss High Gloss Matte Wet Look N/A N/A Base Solvent-Based Solvent-Based Water-Based Solvent-Based Solvent-Based N/A N/A Chemical Type Acrylic Acrylic Acrylic Acrylic Hybrid N/A N/A Life Up To 1-3 Years Up To 1-3 Years Up To 1-3 Years Up To 1-3 Years Up to 3-5 YEars N/A N/A Provides Wet Look ✔ ✔ ✘ ✔ ✔ ✘ ✘ Cure and Seal ✔ ✘ ✔ ✘ ✘ ✘ ✘